Blank Patch is a solo live hardware Drum & Bass act from Copenhagen.
No laptops. No DJ decks. No sync button. All music is built and performed
live on hardware. The act is fully self-contained and arrives plug & play.
Performance Overview
Act
Blank Patch (solo, 1 performer)
Genre
Live Drum & Bass / Hardware Electronic
Set length
~60 minutes (10 tracks)
Setup time
30 minutes
Soundcheck
Line check sufficient — no full soundcheck required
Tear-down
15 minutes
Crew
None required — self-operated
Audio Requirements
Output from artist
Stereo, balanced — 2× XLR (preferred) or 2× ¼" TRS jack, line level
Cables
Artist provides instrument-side cables. Venue provides patch from stage box to FOH.
Monitoring
1× stage monitor (wedge) at performer position, full-range, fed from FOH
FOH system
Professional PA capable of clean, sub-heavy reproduction down to 35 Hz
DI boxes
Not required — outputs are line level and balanced
Note on Levels
The signal from the act is mastered, balanced and ready for FOH. No additional
EQ or processing required. Limiter on master bus optional but recommended.
Stage & Power
Stage space
Minimum 100 × 60 cm flat table, stage left or centre. Height ~90 cm (standard bar table works).
Power
1× standard 230V Schuko outlet at performer position (sufficient for entire rig)
Lighting
Front light on performer + freedom for house lighting. No specific cues required.